Results 1 to 1 of 1
  1. Username Protected
    Marcus Adolfsson's Avatar
    Really Frequent Poster

    Posts
    189 Posts
    Thanked 37 times
    Icon A5 Owner & Pilot
    Join Date
    Joined Oct 2020
    Location
    St Petersburg, FL
    Location
    KPIE
       #1  

    Exclamation SD: Inspect fuel pressure relief block (SD-100421-A)

    SD: Inspect fuel pressure relief block. Replace if non-conforming. (SD-100421-A)

    ICON aircraft has become aware that a group of fuel pressure relief blocks were improperly machined causing an internal O-ring to not seal properly. Two different vendors supplied the fuel blocks, but only one vendor’s product was improperly machined. All the aircraft affected listed above must be inspected and those with the non-conforming fuel pressure relief blocks will need to have the non- conforming part replaced. To date, there have been no reported fuel leaks due to the O-ring not sealing properly.

    DATE ISSUED: 10/4/2021
    DATE EFFECTIVE: 10/4/2021
    S/N: 56-74, 76-135, 137-139, and 142
    TIME OF COMPLIANCE: Prior to next non-ferry flight. Up to 10 hours of ferry flight by owner allowed to facilitate delivery to an ICON Service Partner

    https://www.iconaircraft.com/wp-cont...100421-A-1.pdf

Posting Permissions